PRODUCTS
A manufacturer with many years of research and development, design and production of environmental testing machines, with strong experience and cooperation with well-known domestic and foreign companies, products are exported to many countries and regions in the world.
-
Environmental test chamber
-
Battery test box
-
Mechanical testing machine
-
Furniture testing machine
-
Salt Spray Test Chamber
-
Dust Test Chamber
-
Three Comprehensive Test Chamber
-
Rain Test ChamberRain Test Chamber
-
Cold and Hot Shock Test Chamber
-
Battery Impact Tester
I. Product use
The slope impact test bench simulates the ability of product packaging to resist impact damage in the actual environment, such as handling, stacking of shelves, sliding of motors, loading and unloading of locomotives, transportation of products, etc. This machine can also be used as scientific research institutions, colleges and universities. Colleges, packaging technology testing centers, packaging material manufacturers, foreign trade, transportation and other departments are commonly used test equipment for inclined impact.
2. Technical parameters
◆Load (kg): 200
◆Impact panel size (mm): 2300mm*1900mm;
◆Maximum sliding length (mm): 7000
◆Impact speed range (m/s): 0-3.1m/s adjustable (usually 2.1/m/s)
◆Peak acceleration range of impact Half sine wave: 10~60g:
◆Impact Waveform Half-sine wave: Maximum impact velocity change (m/s) 2.0-3.9m/s.
◆Impact velocity error: ≤±5%
◆Trolley table size (mm): 2100mm*1700mm
◆Power supply voltage: three-phase 380V, 50/60Hz
◆Working environment: temperature 0～40℃, humidity ≤85% (non-condensing)
◆Control system: microprocessor (micro-processor) single chip microcomputer.
◆The angle between the guide rail plane and the horizontal: 0~10 degrees
3. Performance characteristics
1. Flexible positioning electric pulley, easy to fix the position easily, and realize the required speed change value;
2. The height of the pulley is relatively low, which is conducive to the installation of test products; the reinforced impact-resistant board ensures a firm structure.
3. The table surface of the trolley can be adjusted to be horizontal, which is convenient for users to install the test piece; the angle adjustment is driven by a cylinder, which is flexible and convenient.
4. It can be operated by remote control to fully ensure the safety of test personnel;
5. The customer only needs to fix the machine on the ground during installation, without other complicated operations or installation, and the test is convenient.
6. Safety monitoring, the device does not start the test when there are people or obstacles within 1 meter around the inclined platform
Four, meet the standards
Meet the requirements of GB/T1019, GB/T4857 and other series of standards
粤ICP备11019337号 Dongguan Kexun Precision Instrument Co., Ltd. Copyright © 2020. . All Right Reserved www.300.cn