A manufacturer with many years of research and development, design and production of environmental testing machines, with strong experience and cooperation with well-known domestic and foreign companies, products are exported to many countries and regions in the world.

Current：

Homepage

Battery Impact Tester

Vacuum Ovens for Batteries

Product categories 







Vacuum Ovens for Batteries

Product serial number

Category

Battery Impact Tester



Description

Introduction:
Vacuum ovens are also known as vacuum drying ovens, battery ovens, vacuum baking ovens and vacuum ovens. It is suitable for fast and efficient drying and de-watering of lithium-ion battery cells. Intelligent, high efficiency and high vacuum are its main advantages. Adopting double heating inside and outside, double hot air circulation structure, supporting high vacuum pump, high system cooling air cabinet, forming an integrated perfect design, conventional electric cores only need 4 hours to achieve the drying effect of water content test below 300PPM.

Standards: GB/T 11158-2008, GB/T 29251-2012, JB/T 9505-1999, ICS 71.040.10, GB/1998-1982, GB/12828-1987, GB/f 13306-1991, GB/715464--1995, JB/P5520-1991, JB/T 9329-1999
Principle of operation:
The vacuum ovens with opposite doors, usually three layers, can be set on the wall between the drying workshop and the liquid injection workshop. The drying workshop puts the material into the The oven, after completing the baking can be taken out directly on the side of the filling workshop and injected with liquid. Improves the flow efficiency and more importantly avoids the need to remove the material from the real The possibility of re-infiltration of moisture in the process of transporting the material from the empty oven to another workshop is avoided.
Features:
The vacuum drying oven is designed for drying heat-sensitive, easily decomposed and easily oxidized substances. It can maintain a certain vacuum level in the working chamber and can be filled with inert gas to the inside, especially for some items with complex composition can also be dried quickly. An intelligent digital temperature regulator is used for temperature setting, display and control.
Specifications:

Inner Dimension(H×W×D)	330×820×950mm, 3 layers
Dimension(H×W×D)	2020×1553×1849mm
Opening method	Single door with three layers (double doors available on request)
Heating method	Heat wire heating inside the cavity, hot air circulation. Outside the cavity blower heating, package air supply mode.
Control mode	Programmable plc plus high efficiency temperature control PID combination control.
Temperature uniformity	Empty chamber ±3°C
Temperature range	Normal temperature ~ 120°C
Vacuum retention value	24h≤2%